Product overview

The Etern Optoelectronics 800GBASE Quad Small Form-Factor Pluggable (OSFP/QSFP-DD) portfolio offers customers a wide variety of high-density and low-power 800 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications.

The OSFP/QSFP-DD 800G modules are our latest generation of 800G transceiver modules solution based on a OSFP/QSFP-DD form factor.

Feature and benefits of Etern OSFP/QSFP-DD 800G transceivers

Hot-swappable input/output device that plugs into a 800G Gigabit Ethernet OSFP/OSFP-DD port

Interoperable with other lEEE-compliant 800GBASE interfaces where applicable

High-speed electrical interface compliant to lEEE802.3ck and IEEE 802.3 cu-202

Table 1.        Etern OSFP/QSFP-DD 800G portfolio

Etern OSFP/QSFP-DD 800G transceiver prominent features and differentiators

FLS800C020S

The 800G QSFP-DD DR8 transceiver supports link lengths of up to 500m over a standard pair of G.652 SingleMode Fiber (SMF) with MPO-16 connectors. The built-in digital diagnostics monitoring (DDM) allowsaccess to real-time operating parameters. lt is suitable for 800G Ethernet, Data Center, Breakout 2x400G DR4 or 8x 100G DR application.

FLS801C003S

The 800G OSFP112 SR8 transceiver is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Density for 800 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm. The optical interface uses dual 12 fiber MTP /MPO connector.

FLS800C003S-Lxx

The 800G QSFP-DD Active Optical Cable is designed for 800Gigabit Ethernet links over OM4 multi-mode fiber. This cableis compliant with IEEE 802.3ck, QSFP-DD HW Specification Rev 6.3, and CMIS Rev 5.0. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.

lt provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 800G connections within racks and across adjacent racks.

Specifications

Table 4.        Electrical specifications

Table 5.        Optical specifications

Table 6.        Mechanical specifications

Table 7.        Ordering information

Regulatory and standards compliance

Standards

• QSFP-DD MSA hardware Rev 6.01, QSFP-DD800 hardware specification
• GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
• GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
• GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment
• GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
• Common Management Specification (CMIS) Rev 5.0
• IEEE Std 802.3-2018 IEEE Standard for Ethernet
• IEEE 802.3ba CL88
• IEEE 802.3bs 400GAUI-8 Annex 120E
• IEEE 802.3cd CL136
• IEEE 802.3cu CL140

Table 8.        Laser class for QSFP-DD transceivers

Additional information

For more information about Etern 800G transceivers, visit Etern Optoelectronics website:

https://www.szetern.com, or email to: sales@szetern.com